If the working pressure of any process is less than the inlet line pressure, you can use the pressure reducing valve to set the pressure. It is not recommended to reduce the inlet line pressure in the pressure reducing valve to above 10/1. In this case, it is preferable to use two pressure reducing valves in series.
In order to obtain dry clean steam before using the pressure reducing valve, the condensed water formed by the condensation of steam on the steam-steam separator must be discharged first. For sensitive processes, it is recommended to use a safety valve after the pressure relief valve.

Benefits:
not affected by import pressure and flow changes
Sensitivity control of export pressure is the best choice for pressure control
Applicable to steam, compressed air, etc.
The pressure can be set in the range of 0.2-10 bar by 3 different springs
Easy to install
Easy to set

Application:
Textile
Energy
Refining
Petrochemical
Ocean
Chemistry
Food
Papermaking