BK-33 pipe joints are suitable for steam traps in steam pipes.
BK-33 TD (thermal power)
BK-33 TK (thermostatic)
BK-33 SK (floating ball)
BK-33 BM (bimetallic)
BK-33 pipe joints contain two piston valves in the flow direction. Optional test valves for steam trap testing and line drain are available.
can continue to discharge at saturated temperatures, especially when the amount of condensed water is not fixed.

Tolerate sudden and large pressure changes.
BK-33SK can be easily disassembled and repaired separately.
Air emissions, in addition to the control of the float discharge of the condensate, is also controlled by the internal thermostatic sac.
Waterproof hammer.
If the float loses its function, the condensate drains from the thermostatic sac.

Working conditions:
Maximum working pressure: 32 bar
Maximum operating temperature: 286 ° C
Maximum differential pressure: 4.5/10/14 bar

App:
Drying equipment
Pressure
Steam jacket
Iron

Installation:
BK-33SK float steam trap can be easily installed on the pipe joint. It is usually installed horizontally on a steam line. The flow direction through the pipe joint should be consistent with the direction of the arrow.