HK-23 has a regulating valve so it can discharge a lot of condensate.
DN50 uses 3 thermostatic sacs, DN65-DN100 uses 4 thermostatic sacs.
When the amount of condensate exceeds its discharge capacity, the cone valve opens and drains the condensate. The condensate drain is set by the set screws on the steam trap.
HK-23 should be installed in the pipeline in a horizontal position to improve work efficiency and extend service life. Isolation valves should be used during maintenance and steam trap replacement to ensure safety.

Material structure:
Valve and Bonnet: GGG 40.3 Ductile Iron
Internal parts: Stainless steel AISI 304

Connect:
Flange

Nominal diameter:
DN50 (2”) - DN100 (4”)

Working pressure:
Up to 21 bar

Working temperature:
Up to 250 °C

Typical application:
-The sugar industry
-heating the battery
-Flat pot
-Oven
-Dry Roller