Must be sampled from boiler water from time to time to check whether the boiler water conductivity value is correctly measured. However, if the boiler water is taken out into an open container, part of the sampled water will become flash steam, causing the sample to fail and the conductivity value cannot be measured correctly. To avoid this, a closed cooling unit NK-16 sampling container must be used.

Product Features:
Body: 3" AISI 304 Stainless Steel
Body nominal pressure: PN 16
coil: AISI 316L stainless steel
coil nominal pressure: PN 40
Sampling water inlet valve
Size: 1/4" BSP
Material: Stainless steel
Sealing parts
Maximum pressure: 100 bar
Maximum temperature: 350°C
Cooling water inlet valve
Size: 1/2" BSP
Boiler Water: 400 Bar 350°C
Cooling water: 10 bar 100°C