Apps
Calibration Services and Service Industries
Quality Assurance
Record and monitor process pressure
Measuring pressure peaks

Features
The recording interval can be set between 1 ms...10 s
Measurement range: 0 ... 2.5 kPa to 0 ... 100 MPa
Accuracy: 0.2%, optional 0.1% (including verification certificate)
No external power supply
Software for recording, calibration, and analysis of measured values

Description
A wide range of applications
CPT2500 pressure sensor with USB interface can be connected to the USB interface of any computer through CPA2500 USB adapter.
USB adapters can be used to connect stainless steel pressure transmitters with measurement ranges up to 100 MPa. The USB adapter automatically detects the measurement range of the connected pressure transmitter to ensure high accuracy of pressure measurement.
Features
CPT2500 recording interval can be set between 1 ms...10 s. When the recording interval is greater than 5 ms, the meter records the following data in addition to the current measured value:
Average during the recording period
Maximum and minimum values ​​during the recording period
The pressure spike is easily identified in the entire recorded data. For the logging function, you can also set the start and end conditions so that a pressure peak with a resolution of 1ms can be detected.
Software
All settings can be made using the USB soft 2500 software, which is equipped with a CPA2500 USB adapter. The software graphically displays and evaluates the results.
In addition to USB soft2500 and USB Scan Soft software, WIKA CAL calibration software can also be considered. The software automatically transfers data to a calibration certificate that can be printed.
In addition, WIKA-CAL not only supports computer calibration, but also manages calibration and device data in SQL databases. Data transfer is possible via the USB interface.