Apps
Measure moisture (H2O) content in SF6 inflatable equipment

Features
Get test results quickly, measuring time is about 5 minutes
Light and compact
No maintenance
Using touch screen operation
Long battery life

Description
GA20 analyzer can measure the moisture content of SF6 gas. Due to the operation of the aeration and service equipment, residual moisture is inevitably present in the SF6 gas. However, moisture must be kept as low as possible to ensure long-term trouble-free use of the equipment.
Easy to use
With the GA20 analyzer, users can easily perform measurement operations and get quick results.
By fitting the appropriate connector, the user can connect the GA20 analyzer to the corresponding chamber. At both ends of the sturdy measuring tube, there is a quick connector with self-sealing function to prevent SF6 gas from accidentally leaking into the environment.
Fast, safe
When measuring, the user only needs to let the test gas flow through the measuring chamber of the analyzer. After about 5 minutes, the dew point temperature and moisture concentration of the test gas will be displayed on the analyzer display (in Ppm, volume ratio and mass ratio representation).
Due to the short duration of the test, only a minimum amount of SF6 gas is required. Immediately after the measurement is completed, the test gas should be stored in a gas recovery bag at the outlet of the GA20 to ensure that environmentally harmful SF6 gas does not leak into the surrounding air.
After the recovery bag is full, the SF6 gas can be pumped back into a cylinder using GTU-10 gas transfer equipment for recycling or direct reuse (depending on the specific gas volume).
GA20 analyzer can compensate for the effects of ambient temperature fluctuations. The instrument not only automatically controls the flow, but also repeats the measurement, thus virtually eliminating erroneous measurements caused by operational errors.