×
GDM-100 gas density meter

Standard type

Testable: with shut-off valve and test connector

Testable: Globe valve with humanized design
Apps
Medium and high pressure equipment
Gas density monitoring of closed SF6 tanks
When the pointer reaches the alert setting, the meter will send an alarm signal

Features
The case and connector are welded stainless steel
On-site display, integrated design of switch point signal output
Integrated welding design with temperature compensation; unaffected by ambient temperature fluctuations, not affected by ambient pressure caused by altitude
can compensate for mixed gases
The meter tag has a traceable serial number

Description
SF6 gas density is an important parameter of high pressure equipment. If the gas concentration does not meet the design requirements, the device cannot guarantee safe operation.
WIKA gas density meter can be used to stabilize the output of alarm signals in a low-density state of the equipment in conventional or even extreme environments to avoid danger. The alarm contact will alert the background operator when the air pressure value drops to the set alert position due to leakage.
Apps:
WIKA gas density meter is a fully welded seal with temperature compensation. In order to prevent the ambient temperature and air pressure from affecting the measured value, a false alarm is caused.
Through the on-site instructions, the system pressure is switched to 20 & deg; C compensation value and can be read directly on the dashboard. The built-in electrical contacts can trigger the alarm signal simply and quickly and output it externally.

2019/07/25 14:16:55

991