Features
Pressure regulating control valve is designed to keep the inlet pressure constant. When the system pressure is above the set pressure, the valve opens to maintain a constant inlet pressure and is unaffected by pressure fluctuations. It is installed at the filter outlet in the filtration system to enable efficient backwashing of the system.

Technical specifications
Working with line pressure without additional energy consumption
easy to repair
Classification based on the importance of the pressure zone
Wire-controlled filling tilt system
Stabilize pressure without affecting system pressure and flow changes

Adjust
After the water supply to the system, if the displayed value on the pressure gauge is lower than the required pressure, turn the adjusting bolt clockwise to increase the inlet pressure; if the displayed value on the pressure gauge is higher than required For pressure, turn the adjusting bolt counterclockwise and adjust to the required pressure. After this operation, tighten the lock nut under the fixing bolt and secure the adjusting bolt.

Install
Install horizontally or vertically