Ayvaz SK-50 Float Steam Traps are especially suitable for continuous discharge at steam saturation temperatures. It does not affect transient and large pressure changes. SK-50 is mainly used in systems where condensate is quickly discharged and is also ideal for automatic temperature control systems.
Air and condensate discharge from the thermostatic sac. Therefore, the presence of a water hammer in the pipeline can be prevented. When the float stops working, the sac can continue to drain the condensate to prevent a working bottleneck.

Material structure:
Valve and Bonnet: GGG 40.3 Ductile Iron (DN25)   GG-25 Cast Iron (DN32-40-50)
Internal parts: Stainless steel AISI 304

Connect:
Thread or flange

Nominal diameter:
DN25 (1”) - DN50 (2”)

Working pressure:
Up to 16 bar

Working temperature:
Up to 250 °C

Typical application:
-heat exchanger
-heating the battery
-Water Tank
-Flat pot
-Dry Roller
-Oven