Ayvaz SK-51 Float Steam Traps are especially suitable for continuous discharge at steam saturation temperatures. It does not affect transient and large pressure changes. SK-51 is mainly used in the system of rapid discharge of condensed water, and is also the choice of automatic temperature control system.
Air and condensate discharge from the thermostatic sac. Therefore, the presence of a water hammer in the pipeline can be prevented. When the float stops working, the sac can continue to drain the condensate to prevent a working bottleneck.

Material structure:
Valve and Bonnet: GGG 40.3 Ductile Iron
Internal parts: Stainless steel AISI 304

Connect:
Thread or flange

Nominal diameter:
DN15 (1/2”) - DN25 (1”)

Working pressure:
Up to 16 bar

Working temperature:
Up to 250 °C

Typical application:
-heat exchanger
-heating the battery
-Water Tank
-Flat pot
-Dry Roller
-Oven