Galaxy level electrode device requires conductive liquid for liquid level control. The four levels have been set in production and cannot be changed by the customer. The commonly set liquid level points are:
-High level alarm
-Pump start
-Pump stop
-Low level alarm
Liquid conductivity is used to indicate the level of the liquid. For efficient and safe use, the conductivity of the liquid should be measured.
Customers can use devices with this signal without any equipment, or monitor this control signal from their boards.

Connect:
Flange
Threaded

Working pressure:
Up to 32 bar

Working temperature:
Maximum 238 ºC

Application:
-Steam trap
-Preheating tank
-Some special chemical equipment