Application
Process industry
Equipment construction
General industrial applications
Oil and gas industry
Functional characteristics
Automatic measurement range between HART® host and transmitter via HART® protocol
The range is from -9999 .... 99999 / Bar graph 
Display measurement unit and multiple status information
Explosion-proof form
- Model DIHxx-B: Intrinsically safe type
- Model DIH5x-F: Flameproof enclosure
HART®: Auxiliary function and multi-point communication capability (model DIH52)
Description
The DIH Series Field Display is a 4 to 20 mA current loop display that provides a superimposed HART® communication between the transmitter and the control room. Therefore, the display range and unit are automatically selected based on the settings of the connected HART® transmitter.

Commonly used pressure temperature units are stored before leaving the factory. The "user unit" of the attachment can be written as needed.

The field display can display range alarms as well as MIN minimum and MAX maximum values. The fault current signal of the transmitter can also be detected and displayed. The monitor can be connected to any 4~20mA transmitter.

The display is powered directly from the 4 to 20 mA loop, so the resulting voltage drop does not exceed 3V.

The display can be mounted directly on the face wall. Also available in the 1~2” tube mounting bracket.

The DIH5x-B, DIH5x-Z basic modules can also be mounted separately in other housings.

The display consists of a built-in display module, cast aluminum or stainless steel housing.