Apps
Simple test pressure in the field, laboratory or workshop
providing a small positive or negative pressure
Testing, adjustment and calibration for low-voltage measuring instruments in the following areas: heating, ventilation and air conditioning, clean room engineering, medical engineering and filtration and dust removal technology

Features
Switchable pressure/vacuum
Precise setting through the trim valve
Easy to operate, ergonomic operation
Compact design
Light and easy to carry

Description
Applications
The handheld test pump acts as a pressure source to test, condition and calibrate mechanical and electronic pressure measuring instruments by comparing data. These stress tests can be performed in the laboratory or on the shop floor or at the measuring point.
Easy to operate
If the test item and the sufficiently accurate reference measuring instrument are connected to the manual test pump, the same pressure will be applied to both measuring instruments when the pump is started. Accuracy checks and/or pressure adjustments can be performed on the measured pressure measuring instrument by comparing the two measured values ​​at any given pressure value. In order to accurately approach the measuring point, the manual test pump has a fine adjustment valve.
Easy to use
CPP7-H is a pneumatic manual test pump with a low pressure range up to 0.7 MPa (101.5 psi) that can also be switched to vacuum as low as -80 kPa (-11.6 psi). The maximum pressure or vacuum that can be achieved depends on the connected test volume.
With a smooth pressure generation and integrated trim valve, it is safe and accurate to set very small positive/negative pressures in the mbar range.
T-connector with hose connection allows users to easily connect test items and reference measuring instruments.